Checks, in order
- Wheel speed sensors and wiringRemove, clean and reinstall each sensor. Check the wiring along the axles for chafing, especially after lifts or trail damage.medium $ · under about $50
- Read the ABS codeThe ABS system stores its own flash codes. The factory service manual gives the procedure for your year.medium $ · under about $50
- Brake fluid levelLow fluid can trigger warning lights too. Top up and look for the reason it was low.easy $ · under about $50
Applies to: FZJ80 (1993–1997 US, 1FZ-FE), Lexus LX 450 (1996–1997), FJ80 (1991–1992 US, 3F-E). Engine checks assume the 1FZ-FE unless noted.
Tools and parts for these checks
Links below are Amazon affiliate links: as an Amazon Associate, toyotadata earns from qualifying purchases, at no extra cost to you. Confirm fitment for your exact truck before you order.
| ITEM | USED FOR | BUY |
|---|---|---|
| Digital multimeter | Voltage, ground and continuity checks | Shop on Amazon |
| Front brake pads | Replacing worn or glazed pads | Shop on Amazon |
| Genuine Toyota DOT 3 brake fluid | Flushing old fluid; confirm DOT 3 on your reservoir cap | Shop on Amazon |
| One-person brake bleeder kit | Bleeding air out of the lines | Shop on Amazon |
Go deeper
Other brakes problems on the 80 Series Land Cruiser
More 80 Series Land Cruiser problems
- Temperature climbs when towing, climbing or on hot days (Cooling)
- White smoke, sweet smell or coolant disappearing (Engine)
- Turn the key: click or nothing, engine won't crank (Starting & Charging)
- Cranks fine but won't fire (Fuel & Ignition)
- Rough idle, hesitation or bad fuel economy (Fuel & Ignition)
- Clunk on takeoff or vibration that grows with speed (Drivetrain)
All 14 80 Series Land Cruiser symptoms in the interactive troubleshooter →
General guidance from owner experience. Confirm torque specs, fluid capacities and procedures in the factory service manual. Brakes, steering and anything structural: if in doubt, have a qualified shop inspect it before driving.